Product ID:522 HAI-522 ALLOY, NICKEL ALLOYS
MSDS Date:05/24/1990
FSC:9650
NIIN:00N031467
MSDS Number: BNVNW

HARRISON ALLOYS INC

308 MIDDLESEX STREET
HARRISON, NJ 07029
US

Emergency Phone: 201-483-4800

Info Phone: 201-483-4800

Cage: 49076

HARRISON ALLOYS INC

HARRISON, NJ 07029 US

Telephone: 201-483-4800

Cage: 49076

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 2-6%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 2%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 96%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:UNDER NORM HNDLG & USE, EXPOS TO
SOLID, MASSIVE FORMS OF ALLOY PRESENTS FEW HLTH HAZ. THEY MAY
INCLUDE SKIN IRRIT/ OTHER ALLERGIC REACTIONS IN SENSITIVE
INDIVIDUALS.ACUTE: NAUSEA, TIGHTNESS OF CHEST, FEVER, IRRIT OF
EYES, NOSE, THROAT & SKIN; LOSS OF CONSCIOUSNESS DUE TO WELDING
GASES OR LACK OF O2. (EFTS OF OVEREXPOS
Explanation of Carcinogenicity:NICKEL: GROUP 2B (IARC), ANTICIPATED TO
BE A CARCINOGEN(NTP).
Effects of Overexposure:HLTH HAZ: CHRONIC: ADVERSE EFTS MAY INCLUDE
SKIN SENSIT, NEUROLOGICAL DAM & RESP DISEASES (BRONCHIAL ASTHMA,
LUNG FIBROSIS/PNEUMOCONIOSIS). RECENT EPIDEMIOLOGICAL STUDIES OF
WORKERS MELTING & WORKING ALLOYS CONTAINING NICKEL-CHROMIUM HAVE
FOUND NO INCREASED RISK OF CANCER.
Medical Cond Aggravated by Exposure:SKIN IRRITATION OR OTHER ALLERGIC
REACTIONS IN SENSITIVE INDIVIDUALS.

First Aid:INHAL: REMOVE FROM EXPOSURE & OBTAIN PROMPT MEDICAL
ATTENTION. ADMINISTER OXYGEN IF UNCONSCIOUS. IF NOT BREATHING,
RESUSITATE IMMEDIATELY. INGEST: CALL MD IMMEDIATELY . EYES:
IMMEDIATELY FLUSH W ITH POTABLE WATER FOR A MINIMUM OF 15 MINUTES,
SEEK ASSISTANCE FROM MD .

Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MATL IS UNFLAMMABLE; HOWEVER, WELDING
ARCS AND SPARKS CAN IGNITE FLAMMABLE LIQUIDS & VAPORS AND
COMBUSTIBLE SOLIDS.

Spill Release Procedures:UNDER NORM HNDLG & USE, MATL IS NOT VOLAT/
DUSTY & DOES NOT PRESENT SPILLAGE & LEAKAGE PROBLEMS. NO PROT REQD,
EXCEPT AVOID PRLNGD/RPTD DIRECT SKIN CONT IF SENSITIVE TO METALS.
USE GLOVES. IF HOWEVER, MATL IS RELEASED/SPILLED FROM
CUTTING,(SUPP DATA
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:MATERIAL IN SOLID FORM DOES NOT
REQUIRE SPECIAL PRECAUTIONS IN HANDLING AND STORING.
Other Precautions:USE INDUSTRIAL HYGIENE AIR MONITORING TO ENSURE THAT
THE USE OF THIS MATERIAL DOES NOT CREATE EXPOSURES WHICH EXCEED THE
LEVELS SPECIFIED FOR THE INGREDIENTS LISTED.

Respiratory Protection:IF SOLID METAL ALLOYS ARE CONVERTED IN MFG
(INCLUDING, GRINDING, HIGH TEMPS CUTTING & WELDING) PROCESSES TO
DUSTS, FUMES, GASES/MISTS & VENT IS NOT ADEQ TO MAINTAIN EXPOS <
LIMITS SPECIFIED, THEN RESP PROT SHLD BE USED. USE ONLY (SUPP
DATA)
Ventilation:IF SOLID METAL ALLOYS ARE CONVERTED TO DUSTS, FUMES/MISTS,
MAINTAIN WORKING ENVIRON < EXPOS LIMITS SPECIFIED (SUPP DATA)
Protective Gloves:LEATHER OR RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WHEN CUTTING, GRINDING/WELDING, WEAR FACE
PROT & FLAME RETARDANT CLOTHING.SELECT WELDING LENS SHADE FROM AWS
(SUPP DATA)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPILL PROC: GRINDING/WELDING OPERATIONS, VACUUM RESIDUE INTO SUITABLE
CONTAINERS AND DISPOSE OF I/A/W EPA OR LOCAL REGS. RESP: NIOSH/MSHA
APPROVED RESPIRATORS I/A/W OSHA 29CFR1910.134. VENT: AND BY US E OF
ADEQ EXHAUST VENT. OTHER PROT EQUIP: PUBLICATION F2.2.

HCC:N1
Boiling Pt:B.P. Text:4982F,2750C
Melt/Freeze Pt:M.P/F.P Text:2642F,1450C
Spec Gravity:8.9 (H2O=1)
Solubility in Water:0
Appearance and Odor:GREY METALLIC;ODORLESS.ALLOY PRODS ARE SOLID METALS
SHAPED AS WIRE, ROD/STRIP.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
AVOID ACIDS. CONTACT WITH MINERAL ACIDS WILL RELEASE HYDROGEN - A
READILY COMBUST GAS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDES OF METALS, CHROMATES, FLUORIDES
& COMPLEX METALLICS. THE GASES MAY INCLUDE CO, OZONE AND NITROGEN
OXIDES.

Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE AND LOCAL
REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.